This tutorial will show you how to use the PPTP Protocol to connect TRENDnet Router to OysterVPN. You’ll need a TRENDnet Router and an active OysterVPN subscription to get started with the setup process. If you don’t already have a subscription, clickhereto subscribe.
- 1To access your router’s Web Configuration Panel, open a web browser and type168.10.1into the address box. It will prompt you for theUsernameandPasswordfor your router.
- 2Log in with that information. Theusernameandpasswordfor the router should beadminandadmin, respectively. Otherwise, consult the router’s‘User Manual’for this information.
- 3Then Click on WAN
- 4Now fill in the following details:
- Connection Type: PPTP
- Dynamic IP: Enable
- DNS: 8.8.8.8
- Service IP/Name: Enter your desired PPTP VPN server address. Hence for this you can visit OysterVPN server list here
- DNS: 8.8.8.8
- PPTP Account: Enter your OysterVPN Username
- PPTP Password and Retype PPTP Password: Enter your OysterVPN Password
- Auto-reconnect: Connect-on Demand
- Idle Time Out 5
- MTU: Don’t change and leave as it is
- MPPE Enable: Put a checkmark
- Click “Apply” to save changes.
- 5You will be connected shortly.
- 6That’s it! You’ve completed the installation and configuration of OysterVPN on Belkin Router using PPTP protocol.